Shielded XPTC Tray Cable with Ground

KrisTech’s shielded XPTC tray cable meets the following standards and tests, including:

• UL 1277
• ICEA S-73-532 / NEMA WC 57
• ICEA S-95-658 / NEMA WC 70

• Conductors – Single conductors are solid or stranded and annealed or hardened uncoated copper. Tinned conductors and other stranded configurations are available upon request.
• Insulation – Single conductors are insulated with concentrically applied XLPE (crosslinked polyethylene) insulation that is VW-1 flame and “Oil and Gasoline Resistant I” rated. All black insulation is rated “Sunlight Resistant.” All colored insulation is rated “Sunlight Resistant” in sizes #6 AWG and larger, and optional in sizes #8 AWG and smaller.
• Ground Conductor – Single bare copper conductor or insulated green XLPE conductor.
• Shield – The assembly is lined with an optional tinned copper drain wire and then wrapped with an Aluminum-Mylar shielding.
• Jacket – The assembly is jacketed with a concentrically applied PVC jacket. Overall cable profile will be similar to the interior conductor assembly layout.

Print legends on the wire include the manufacturer, conductor size, voltage rating, UL symbol (if applicable) and type designation. Standard length spools are 500 or 2,500 feet.

Print Legend

• KRISTECH WIRE CO. #XX AWG XX CONDUCTOR BARE GROUND E515926 (UL) SHIELDED TC-ER XHHW-2 600V 90C WET/DRY PVC JACKET SUN RES FT4 OIL RES I DIR BUR “ROHS” MADE IN USA
• KRISTECH WIRE CO. #XX AWG XX CONDUCTOR INSULATED GROUND E515926 (UL) SHIELDED TC-ER XHHW-2 600V 90C WET/DRY PVC JACKET SUN RES FT4 OIL RES I DIR BUR “ROHS” MADE IN USA