This product is primarily used to secure components used in overhead transmission and distribution lines to pin insulators on distribution or utility poles. Copper tie wire can also be used for grounding applications.
This product is primarily used to secure components used in overhead transmission and distribution lines, including conductors and pin insulators. Aluminum tie wire is also suitable for grounding applications.
TAP Wire is used as a lead from primary phase conductors to equipment bushings. This is suitable for usage in spacer cable, tree wire, weatherproof wire, and bare wire distribution lines rated for 5KV.
Used with transformer risers at voltages of up to 35kV. Conductors are solid or stranded soft copper. Stranded conductors are concentrically stranded. The insulation is a high molecular weight polyethylene (HMWPE).
Covered Line Wire is used as a transformer wire, and provides excellent mechanical, abrasion, moisture, chemical and oil resistance. It is not considered an electrical insulation; however, it does reduce faults due to atmospheric conditions, vibrations, and crossed leads.
RHH/RHW-2/USE-2/XLP-E is suitable for most current direct burial and industrial lighting or power wiring solutions in conduits, ducts, or other approved raceways, especially those where better insulation toughness and resistance to moisture and heat is needed.
SIS conductors are most often used in switchboards and panel boards as specified by the National Electrical Code. Although SIS is not recognized in NEC Article 310 for use in conduit, Kris-Tech’s is dual-rated as XHHW-2 and is approved to use in recognized raceways.
Used in overhead electrical transmission and distribution, and for grounding electrical systems where high conductivity and flexibility is required. Suitable for numerous other applications.
Our tracer/locator wire can be used for locating a buried cable or pipe. Most typically, a frequency generator is connected directly to the cable you want to trace, and a high or low frequency signal is applied.
Copper Clad Steel (CCS) Tracer Wire is a solid steel core conductor with a concentrically clad copper coating and insulated with a high molecular weight polyethylene (HMWPE). The higher tensile (breaking) strength provided by CCS makes it a viable alternative in directional boring applications.
Kris-Tech is the team you can trust when you need high-quality, custom manufactured wire and cable products delivered fast. Complete your next project with confidence, backed by the best lead times in the industry and world-class customer service professionals.
Cheryl, Wesco Utilities
Sean, Greentech Renewables
Project on the line? You shouldn’t have to wait. Get a personalized quote in 30 minutes or less during business hours.