MTW Wire

Description

Machine Tool Wire (MTW) consists of stranded, soft annealed copper conductors insulated with Polyvinylchloride (PVC). MTW is UL rated for 600 volts. #10, 12, and 14AWG are 19 strands, all others are “highly flexible” stranding constructions. The Appliance Wiring Material (AWM) constructions may be solid or stranded and are available in 1000 V ratings.

Canadian Standards Association (CSA) listed AWM-IA (Class I Group A) and TEW products are 600 V FT-1 rated. All our standard products are compliant and multi-listed as types TW, THW, MTW, TEW, and the applicable AWM Style Number.

Application

Type MTW/TEW is most often found in general purpose wiring circuits, for machine tool wiring and the internal wiring of appliances, such as control panels, wiring for refrigeration equipment, air-conditioning equipment, control wiring of machine tools, automatic washers, etc. It can be used in dry locations up to 90°C or wet locations. When exposed to oil or coolant  it is rated for 60°C. CSA Type TEW rating permits use in dry locations up to 105°C; or wet locations.  When exposed to oil or coolant it is rated for 60°C.

Our standard circuit size (#10, 12, 14 awg) products are marked Style 1015. Larger MTW products are marked AWM 1028 or 1283. The governing standard for application of these products is the National Fire Protection Association (NFPA) Publication #79.

Standards

Our MTW is produced to the following specifications and requirements:

  • UL
  • CSA
  • ICEA/NEMA
  • NFPA #79

MTW/AWM/THW Spec Sheet

Available Products

  • Sizes #22 through 1/0 AWG
  • Solid or Stranded
  • Up to 12 Color Options
  • Standard insulation is a soft, flexible PVC

Custom Options

  • Tinned wire available for all sizes
  • Striping or Twisting available
  • Custom lengths and packaging
  • VW-1 available upon request
  • Highly Flexible Class Stranding

 

Appliance Wiring Material (AWM)

Description

Appliance Wiring Material (AWM) consists of stranded, soft annealed copper conductors insulated with Polyvinylchloride (PVC). Constructions may be solid or stranded and are available in 1000 V (1kV) ratings.

Canadian Standards Association (CSA) listed AWM-IA (Class I Group A) and TEW products are 600 V FT-1 rated. All our standard products are compliant and multi-listed as types TW, THW, MTW, TEW, and the applicable AWM Style Number.

Application

Type AWM is most often found in general purpose wiring circuits, for machine tool wiring and the internal wiring of appliances, such as control panels, wiring for refrigeration equipment, air-conditioning equipment, control wiring of machine tools, automatic washers, etc. Its intended uses are limited to dry locations at temperatures not to exceed 105°C (applicable to both UL and CSA ratings). Our standard circuit size (#10, 12, 14 awg) products are marked Style 1015. Larger products are marked AWM 1028 or 1283.

The governing standard for application of these products is the National Fire Protection Association (NFPA) Publication #79.

Standards

Our AWM is produced to the following specifications and requirements:

  • UL
  • CSA
  • ICEA/NEMA
  • NFPA #79

Available Products

  • Sizes #22 through 1/0 AWG
  • Solid or Stranded
  • Up to 12 Color Options
  • Standard insulation is a soft, flexible PVC

Custom Options

  • Tinned wire available for all sizes
  • Striping or Twisting available
  • Custom lengths and packaging
  • VW-1 available upon request
  • Highly Flexible Class Stranding