XPTC Tray Cable #12-2 AWG Shielded With and Without Ground XHHW/PVC

Scope:

Stranded copper conductors (ASTM B-8), crosslinked polyethylene (type XHHW-2) insulated for moisture and heat resistance. Phase identified and cabled together with fillers and/or binders as required. Optional bare copper or insulated green ground cable is included as well. Cabled core is covered with an Aluminum-Mylar shield and a tinned copper drain wire, Covered with an overall black PVC jacket that is gas and oil resistant. Jacket available in colors. Suitable for use in hazardous locations: Class 1 and 2, Division 2.

Applicable Standards and Tests:

• UL 1277 at 600 volts
• Flame Rated: IEEE 1202 (70,000 BTU)
• ICEA S-95-658/NEMA WC-70
• Temperature Rated at 90°C Wet/Dry
• -25°C Rated
• VW-1 Rated Conductors
• Direct Burial & Sunlight Resistant
• Exposed Runs Rated (TC-ER)
• Color Code: NEMA WC 57/ICEA S-73-532 Table E-1, E-2, or M4

Construction:

Conductors:

Concentric 19 strand soft drawn annealed copper per UL and ASTM requirements. Tinned conductors and other stranded configurations are available upon request. Single conductors are Oil & Gas Resistant I.

Insulation:

Crosslinked polyethylene (XLP) is VW-1 rated and Oil and Gasoline Resistant I. All black insulation is rated “Sunlight Resistant”.

Ground Conductor:

Bare copper conductor or insulated green crosslinked polyethylene (XLP) is Oil and Gasoline Resistant I.

Shield:

Aluminum-Mylar shield with a tinned copper drain wire.

Jacket:

A black, flame resistant, Polyvinyl Chloride (PVC) jacket is extruded over the assembly. The surface profile shall approximate that of the interior assembly.

Identification and Packaging:

The wire shall be identified by surface marking indicating the manufacturer, conductor size, voltage rating, UL symbol, and type designation.

Print Wheel:

Kris-Tech Wire XX AWG XX conductor E515926 (UL) TC-ER XHHW-2 600V 90°c wet/dry pvc jacket sun res FT4 “RoHS” made in USA